Kirigami rose .. picture generated by AI
There are several variants of colour combinations try also new and show us your colour combos :-)
#############################################################################
Red variant
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used:
PLA JakobFIlament Black Transmission Distance: 0.3
PLA 3Dpower Red Transmission Distance: 5
PLA Aurapol Orange Transmission Distance: 4.4
PLA Jamghe White Transmission Distance: 5.2
Swap Instructions:
Start with Black
At layer #12 (0.6mm) swap to Red
At layer #22 (1mm) swap to Orange
At layer #34 (1.48mm) swap to White for the rest.
####################################################################
Ping/Yellow
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used:
PLA JakobFIlament Black Transmission Distance: 0.3
PLA JakobFilament Ping Transmission Distance: 2.4
PLA Jamghe Yellow Transmission Distance: 2.8
PLA Jamghe White Transmission Distance: 5.2
Swap Instructions:
Start with Black
At layer #12 (0.6mm) swap to Ping
At layer #22 (1mm) swap to Yellow
At layer #34 (1.48mm) swap to White for the rest.
####################################################################
Orange/Yellow
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used:
PLA JakobFIlament Black Transmission Distance: 0.3
PLA Aurapol Orange Transmission Distance: 4.4
PLA 3Dpower Yellow Transmission Distance: 2.8
PLA Jamghe White Transmission Distance: 5.2
Swap Instructions:
Start with Black
At layer #12 (0.6mm) swap to Orange
At layer #22 (1mm) swap to Yellow
At layer #34 (1.48mm) swap to White for the rest.
####################################################################
Bluelagun
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used:
PLA JakobFIlament Black Transmission Distance: 0.3
PLA Jamghe Blue Transmission Distance: 5
PLA JakobFilament Light Blue Transmission Distance: 3.2
PLA Jamghe White Transmission Distance: 5.2
Swap Instructions:
Start with Black
At layer #12 (0.6mm) swap to Blue
At layer #22 (1mm) swap to Light Blue
At layer #34 (1.48mm) swap to White for the rest.
####################################################################
Pink/white
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used:
PLA JakobFIlament Black Transmission Distance: 0.3
PLA JakobFilament Ping Transmission Distance: 2.4
PLA Jamghe White Transmission Distance: 5.2
PLA Jamghe White Transmission Distance: 5.2
Swap Instructions:
Start with Black
At layer #12 (0.6mm) swap to Ping
At layer #22 (1mm) swap to White
At layer #34 (1.48mm) swap to White for the rest.
#############################################################################
"Loving my content? Show some love with a thumbs up 👍❤!"
Enjoy :-)
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.