Honkai Impact 3rd - Erdős Helia [Valkyrie Boltstorm: Helia wears] Lightning Arc

This model is designed for Helia - Valkyrie Boltstorm: Helia Wears cosplay from Honkai Impact 3rd Part II.

Please note that this model is designed as a simple cosplay prop with no other function, projectile and moving mechanisms are not to be expected from this model.

It is separated into a few parts to fit in a printer with a platform size of 200mm x 200mm x 200mm. Each part is then sliced in half for a flat face that can easily lay on the printing bed.

There is a picture with pieces labeled to their file names in the preview section which you can refer to.

I also include a combined version just in case you need it.

There are tunnels with diameters of 5mm punch on the model for alignment and bone installation purposes. You can skip install bones if you are confident with your gluing and PLA welding skills since the overall size of the prop is not that huge.

You can use anything with similar dimensions for the purposes mentioned above or use the included "peg" file, a cylinder with a diameter of 4.5mm. Printing a "peg" file should be the last resort as it is quite small to print.

There are also cavities made in Part 2 as a guide to installing Part 3 and Part 4.

For scaling, please use the same scale for all the pieces.

Cheers and Happy Printing!

Dimension: 322.68mm x 198.29mm x 107.41mm