mariposa de adorno
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA smartfil negro Transmission Distance: 0.4
PLA smatfil rojo Transmission Distance: 2.3
PLA smatfil naranja Transmission Distance: 1.2
PLA smatfil amarillo Transmission Distance: 5.8
PLA smatfil White Transmission Distance: 6
Swap Instructions:
Start with negro
At layer #7 (0.64mm) swap to rojo
At layer #11 (0.96mm) swap to naranja
At layer #14 (1.2mm) swap to amarillo
At layer #17 (1.44mm) swap to White for the rest.