Measuring about 96x27x7cm. Identical 3.99 degrees as the real structure.

Recommend Marble PLA, uses about 900g.

Built in provision for different thickness adhesives strips on the back, very light and easy to install.

Print the middle section plate 3 times for the full set, 4 overnight prints in total.

Oriented for optimal progress viewing both in person and built-in camera feed for enclosed printers.

Technical Note:

• The Bottom Section has brim setup to be extra safe, as it's taller and lightning fill curls can cause adhesion issue.
• The Top section is the only part with overhang, I've increased the amount of bottom layers for it.