This is a set of 10 different day of the dead style sugar skull Croc charms. These are designed to be printed in TPU with 2 manual filament changes. I was running into issues recently with a slight layer shift when adding a pause at a layer, so I have instead used the custom gcode command which adds a pause and re-homing, which seems to work better. They can be printed in alternate materials such as PETG using an AMS, by simply changing the pause/custom gcodes to filament changes. I would not recommend using PLA as the stems are too brittle and they will break easily. If you print these in TPU, make sure your filament is bone dry and you have your retraction settings tuned. I look forward to seeing all of your color combinations!