Here is UnimatrixRed's version of the classic TNG combadge designed to print in separate colors. I have also put in a multicolor version. The gold part can be printed 2 different ways. I printed it standing up as it looked smoother, but it is easier to print lying on its back. The thin silver delta is glued to the thicker one to make a smoother effect. You will have to bend it some. I printed the thinner one on the starry build plate and I think that it looks pretty cool. I used little clamps and Loctite super glue to hold and bend the thin delta over the thicker one. I also trimmed that little peg before I glued it.

The model is fitted for 6x2mm magnets for the back and to hold it on the stand.

Please support the original designer UnimatrixRed on the original link. This and the other models are mainly his designs just tweaked and laid out for the Bambu printers.