The skull of a monkey, x-rayed and made of smoke.
Print at 100% infill with a layer height of 0.2mm with a base layer of 0.32mm
Use any colors you'd like, either via AMS or by manually swapping filaments as indicated below.
Filaments Used:
PLA BambuLab Matte Charcoal (I've used Dark Blue) Transmission Distance: 0.8
PLA SPARKLE BambuLab Slate Gray Sparkle Transmission Distance: 10
PLA BambuLab Matte Ash Gray Transmission Distance: 10
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions:
Start with Charcoal (I've used Dark Blue)
At layer #3 (0.72mm) swap to Slate Gray Sparkle
At layer #5 (1.12mm) swap to Ash Gray
At layer #8 (1.72mm) swap to Ivory White for the rest.
Happy printing, and share your make!
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.