Wall lamp skull with cylinder open eyes

Wall lamp skull with cape + collar with top hat

the wall mount is already integrated

Eyes open the cylinder can be exchanged for other top parts

Cut (large format)

with 3 hand sizes

Pirate hook

Making off, for our skull lamps

https://www.youtube.com/watch?v=V5YrS1zzKeY

2 small examples of how this can look on the wall:

https://www.youtube.com/shorts/_mbLjwfQsUg

https://www.youtube.com/shorts/NAV4GEA-kAQ

Can also be used for storage only

3D model file

High polygon

---

Print this special lamp or storage unit.

The model is easy to produce by printing it in parts. A cable duct runs through the inside of the figure, starting from the hollow skull. The lid/headgear is removable.

Intended use: Decoration, lighting or storage (without lamp)

VERY IMPORTANT (as of 17.02.2024)

The headgear Eagle and Witch's Hat must still be adapted to the wall lamps. All other headgear fits

All models are prepared in such a way that light can be laid easily and well inside the sculpture. All models are available with closed and open eyes.

Of course, you are free to choose whether you want to use only the eyes as a light source or whether you want to print the headgear with a transparent material. Then you can either have the eyes and/or headgear light up or just the top of the head (with the eyes closed). All models are easily divisible and the series has been printed by us to ensure that everything is functional.

For each of these lamps there is the possibility to buy different headgear.

Further headgear

The removable headpiece can be printed with a transparent filament.

The light is then clearly visible, even without open eyes

We have purchased the following accessories

TIP for the frame

E14 lamp socket E14 lamp socket light bulb socket

Socket (link)

TIP for the lamp

Lamp (link)

TIP for the power cable

Power cable (link)

Please ensure that the lamps are installed correctly and professionally. By providing our instructions in videos and texts, we assume no liability for the installation or for the recommended components that we link to here. If in doubt, you should consult an electrician.

The total printable model comprises 11 STL and can be printed in parts:

Cape-Skull-Collar-Lamp-V1-Plate.stl

Cape-Skull-Collar-Wall-Lamp_Open_Eyes.stl

Cape-Skull-Collar-Wall-Lamp_Open_Eyes_CUT_BODY.stl

Cape-Skull-Collar-Wall-Lamp_Open_Eyes_CUT_BODY-BOTTOM.stl

Cape-Skull-Collar-Wall-Lamp_Open_Eyes_CUT_HEAD.stl

Hand.stl

Hand-BIG.stl

Hand-EXTRA.stl

Headgear-CylinderHat.stl

Pirate-Hook-Arm.stl

Pirate-Hook-hook.stl

Detailed help for printing our models

Designing the eyes

Further helpful learning videos

License Information:

These files are available under the "Royalty-Free License". This means that printed or otherwise created versions of this model may not be used or sold for commercial purposes.

The distribution of STL files is not permitted.

Watermarks and changes:

The original STL file and modified versions may not be changed or sold as they are protected with a digital, invisible watermark.

If you wish to make changes to the model, please contact the designer, Bernhard Queißer, from QU3D in Germany. He is open to dialog and will be happy to discuss your modification requests.

Design + Copyright: Bernhard Queißer

QU3D.de

Country of origin: Germany

Assistance with printing our models in German

https://www.qu3d.de/support

Assistance with printing our model.

https://www.qu3d.de/support-en

Design of the eyes

https://www.qu3d.de/supportgestaltung

Further helpful learning videos, e.g. on the topic of supports

https://www.qu3d.de/videos