This is the Qidi Tech 1 Upgrade series:
replacing the old touch screen with Tft35 touch screen.
Print:
1 x Face Case
1 x Henge Bar
2 x Henge
0.2 mm layer height.
50% infill or more.
Assembly:
8 pieces M3x8 mm
Note: Do not over tight the back screen screws, due to the veriable tolorange between the screen and its board i left a grace space to withstand that differences in different screens.
So Do not over tight, just tight enough to stay still.
Also, i was testing fuzzy skin mode, that's why you can see fuzz around the screen case in the photos.