Wall lamp skull with woolly hat eyes open

Wall lamp skull with woolly hat

Eyes open, the woolly hat can be exchanged for other tops

The wall mount is already integrated

Cut (large format)

with 3 hand sizes

Pirate hook

Making off, for our skull lamps

https://www.youtube.com/watch?v=V5YrS1zzKeY

2 small examples of how this can look on the wall:

https://www.youtube.com/shorts/_mbLjwfQsUg

https://www.youtube.com/shorts/NAV4GEA-kAQ

Can also be used for storage only

3D model file

High polygon

Print this special light or storage.

The model is easy to produce by printing it in parts. A cable duct runs through the inside of the figure, starting from the hollow skull. The lid/headgear is removable.

Intended use:

Decoration, lighting or storage (without lamp)

VERY IMPORTANT (as of 17.02.2024)

The headgear Eagle and Witch's Hat must still be adapted to the wall lamps. All other headgear fits

All models are prepared in such a way that light can be laid easily and well inside the sculpture. All models are available with closed and open eyes.

For the skulls with closed eyes, you can print the headgear with a transparent filament to create a beautiful, subtle light. All models are easy to divide and the series has been printed by us to ensure that everything is functional.

For each of these lamps there is the option to buy different head covers.

Further headgear

The removable headpiece can be printed with a transparent filament.

The light is then clearly visible, even without open eyes

We have purchased the following accessories

TIP for the frame

E14 lamp socket E14 lamp socket light bulb socket

Socket

TIP for the mains cable

Please ensure that the lamps are installed correctly and professionally. By providing our instructions in videos and texts, we assume no liability for the installation or for the recommended components that we link to here. If in doubt, you should consult an electrician.

The total printable model comprises 13 STL and can be printed in parts:

Cape-Skull-Collar-Lamp-V1-Plate.stl

Cape-Skull-Collar-Wall-Lamp_Open_Eyes.stl

Cape-Skull-Collar-Wall-Lamp_Open_Eyes_CUT_BODY.stl

Cape-Skull-Collar-Wall-Lamp_Open_Eyes_CUT_BODY-BOTTOM.stl

Cape-Skull-Collar-Wall-Lamp_Open_Eyes_CUT_HEAD.stl

Hand.stl

Hand-BIG.stl

Hand-EXTRA.stl

Headgear-Woolen-Cap.stl

Headgear-Woolen_CUT-BACK.stl

Headgear-woolcoat_CUT-FRONT.stl

Pirate-Hook-Arm.stl

Pirate-Hook-hook.stl

License Information:

These files are available under the "Royalty-Free License". This means that printed or otherwise created versions of this model may not be used or sold for commercial purposes.

The distribution of STL files is not permitted.

Watermarks and modifications:

The original STL file and modified versions may not be changed or sold as they are protected with a digital, invisible watermark.

If you wish to make changes to the model, please contact the designer, Bernhard Queißer, from QU3D in Germany. He is open to a dialog and will be happy to discuss your change requests.

Please note that the 3D print file may not be modified without prior consultation with us (Qu3D 3D-Design Art). Furthermore, the sale of the 3D print file is not permitted and is subject to license law.

You can select this option when purchasing the model.

Design + Copyright: Bernhard Queißer

QU3D.de

Country of origin: Germany

Assistance with printing our models in German

https://www.qu3d.de/support

Assistance with printing our model.

https://www.qu3d.de/support-en

Design of the eyes

https://www.qu3d.de/supportgestaltung

More helpful learning videos

e.g. on the topic of supports

https://www.qu3d.de/videos