Description:

1. This is a 3D printed model designed and produced based on the blueprint of the M9 wooden board rubber band gun from a foreign expert.

Features:

1. 3D modeling was performed on the original wooden board drawings.

2. We have merged some duplicate components (the original one had over 40 parts, printing them separately was very time-consuming and assembly was also troublesome). Now, with the addition of new gasket parts, there are less than 20 parts, and necessary components have been drilled to avoid secondary drilling during assembly.

3. Added M9 firearm text content, making the model more realistic.

4. Shorter printing time.

5. The original 4mm hole position has been changed to 2.5mm, making it convenient to assemble directly with 1.75mm consumable wire (or M3 screws can also be used for assembly).

Printing:

1. Turn on support printing.

2. PLA material can be printed in motion mode, please use normal printing speed for PETG.

Security:

1. Although rubber bands are not harmful to the human body under normal circumstances, please adhere to a principle: at no time should the muzzle of the gun be aimed at humans or animals.

material

1. 3D model adhesive.

2. 1.75mm consumable wires. (or M3 * 10 screws).

3. Several 4CM rubber bands.

Assembly:

You can refer to the original drawing author's wooden version assembly video for assembly, and use glue to bond the parts together. In the model document, the original drawings are provided, and you can also use the drawings to make a wooden version of the rubber band gun.