GT2 Pulley wheels for belt drives. Both Pulley wheels have a belt width of 6mm and a gear ratio of 1:4
Very easy print!
The model consists of: one Part for each pulley (seperate files)
Tools needed: scissors for support removal (or similar tool)
Additional parts needed: belt
Assembly instructions:
Recommended filament: PETG, PLA, GreentechPro
Hotend: 0,40mm
Print time:
80T(60mm/s)= 2h
20T(60mm/s)= 50min
assembly time: none
Print instructions:
layer height 0,20mm
3 wall loops
top/bottom shells 7 layers
top/bottom shell thickness 1,30mm
sparse infill 25%
sparse infill pattern “gyroid”