Starkiller Inquisitor lightsaber

WIth this lightsaber my original solution to all lightsaber electronics has been reintroduced. This was an attempt to allow you to use not just 1 electronics type but pretty much all the other ones out there. After research, i came to conclusion, pretty much all lightsaber electronics can be broken down to 3 types that cover almost all, if not all, electronics types, so that's why i did :

STYLE 1 - has 4 openings at the front, old charger, or usb C charger, and uses 2 screws for mounting the electronics to the chassis, all at the front

STYLE 2 - has 1 opening on the front - ignition button, and mounts with 1 screw on the back - that mount is offset from the centre upwards

STYLE 3 - similar to style 2, but has the mount screw on the back lined up with the center of the ignition button

Both style 2 and 3 can come with usb c charging ports in different spots (on the back, under the button, on the lower end)

There are also something i call HYBRID electronics - that can be compatible with more than just 1 style.

But now that this is solved, I provided a guide to check which electronics are yours, so that's the STYLE you will print :)

That's it , all simplified for the end user, you :)

Join our community and find out more at:
https://www.facebook.com/groups/3282336185171090

or follow me on instagram: https://www.instagram.com/mysterymakers_3d/

If you like this model please consider joining my patreon. Lots of models each month and many rewards

patreon.com/mysterymakers