Leaning Dice Tower of Pisa by Frameworks

Frameworks

Toys & Games>Board Games

GIF

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

11.8 h

1 plate

4.6(8)

0.2mm layer, 4 walls, 15% infill - A1 mini Optimized

7 h

1 plate

3.5(2)

Boost

145

170

290

Released

Description

DO NOT USE SUPPORTS - or you'll have a terrible time trying to remove everything… and the inside might not work anymore!

Combining my wife's love for Italy with mine for D&D! The Leaning Dice Tower of Pisa! It was a fun challenge trying to see how much detail I wanted to fit into this model knowing that it would need to be printed without supports, but I'm pretty happy with the results! So much so I had to go get some better color filament to complete the look… Inside the tower are two conical ramps to help spin the dice as it goes down, and one more ramp to shoot the dice out the bottom.

Be warned! The print can be fairly challenging with all the small details, but it's fun to watch these bambu printers crush all the bridging and overhangs on this model! I may make a second version with some dice storage but please enjoy this fun little project!

Comment & Rating (20)

@B1gDav3

Boosted

I cautiously proceeded when I heard, "Print with no supports".....and, dog goneit! It came out great! Thanks for sharing such a super-cool print!

The designer has replied

@frameworks

Not going to lie I was scared to print it when I first designed it but I’ve printed it 3 times and it hasn’t failed yet! glad it came out good for you too!

@vinthebat

Print Profile

0.2mm layer, 2 walls, 15% infill

Print at half speed for best results. Extremely detailed, excellent model! PLA Generic Marble Whilte

@user_2170937965

Boosted

phenomenal!! Printed perfect on basic PLA white. Love this!! So detailed and perfect for my 10 sided dice! Thanks so much!! 5 Star! boosted!

(Edited)

@GoodwayTech

Print Profile

0.2mm layer, 2 walls, 15% infill

The first print I did was at 100% printer speed on the P1S and the coloums around the outside printed all weird and were falling off and broke easy. Did a 2nd print at 50% and worked way better and is solid

The designer has replied

@frameworks

thank you for the input! I imagine with the small details I put in this that every print/machine might react a little differently…

(Edited)

@sheajusprints

same issue and then failed at the top

@user_3096053309

Boosted

This is so cool, and such a clever design! I love it!

The designer has replied

@frameworks

thank you!

@user_3096053309

Boosted

Replying to @frameworks :

You are so welcome!

@SwiftPlus

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

came out grate! only 2 pillars failed but easy fix! love it!

@RSM85

Wonder full. Worked great. I had some warping issues but I recken that is a machine Thing

@TRYLOBITE

Print Profile

0.2mm layer, 4 walls, 15% infill - A1 mini Optimized

Required supports to print but the supports ruined the build. This is probably a setting issue, but was a loittle more complicated than intended. At its largest setting on the A1 Mini, typical dice ndid not fit through the shoot.