They asked me to print this model, i liked it so much that went on some adaptations to the original:

- Scaled and sized, is now 140mm high x 90mm ext diameter so it's slightly elongated compared to the original
Yes you can scale it but I don't recommend less than 70% or 100mm high, because there's some walls that might be less than 2 lines thicks and it's suboptimal for quality.

- Added many modifiers, it's to have it more balanced, stronger and faster to print.
Now it has a deeper cavity and there's an infill modifier to make the bottom heavier than the leafs.
Used a copy as modifier, lil'scaled, to joint the external leaves with the inner can, so it's lighter, stronger and faster to print since the upper part now is only an inner and an outer shape, having the three leafs been jointed with the inner body.

In fact the only one made with this modification is the purple, in the pictures. Yellow and pink still had the leafs apart, as in the original file.
Can you really see the difference, now that you know? 😊👌

I made a profile with those thicc lines I usually enjoy don't hide but expose them, it's with a layer height of 0.33, yes it works, the final aspect is like the pink one in the pictures.
Another profile has instead 0.2 height lines but with fuzzy skin and it's the exact profile which printed the purple one.

Enjoy! :)

-H