Daniel

cover

tempImageX4Wr99_14ae0453-e4a8-4c88-a62a-952d8f57089c.jpg

Bildschirmfoto 2024-03-05 um 19.05.05_e47869ce-3638-4bda-99ab-0ff66e29f81b.png

Bildschirmfoto 2024-03-05 um 19.05.13_fae58474-faac-46fc-b030-635a3fe40181.png

plate_1.webp

plate_1.png

<ul><li>0.2 mm layer height</li><li>3 walls</li><li>55% Gyroid infill</li><li>Prints with brim</li></ul><h4>Please ensure the cleanliness of your build plate before printing for optimal adhesion.</h4>

0.2mm layer, 3 walls, 55% infill

<p>This is a 15mm - ¼" Wrench Socket for the Bottle Holder Screw of the Soda Stream Crystal.</p><p>&nbsp;</p><p>Prints without support structurs.</p><h4>Please ensure the cleanliness of your build plate before printing for optimal adhesion.</h4>

Wrench Socket for Soda Stream [15mm - 1/4 Inch]

Global

Print Profile(1)

Description

Please ensure the cleanliness of your build plate before printing for optimal adhesion.

Comment & Rating (0)

License

Related Models

1/2 Inch Socket Rail

7 inch screen case + Raspberry Pi 5 case

1/4 Inch Hex Shank Bit Holder Wall Mountable

Gardena Adapter - to 3/4 inch thread