APS Hellfire Taginn Adapter

PRESENTATION

Here's the adapter to use Taginn brand warheads with Hellfire APS grenades.

Works well with Reaper warheads with black base.

Developed performance is similar to that of standard Taginn Shells *(provided CO2 is used). Simply unscrew the original shell containing the beads and screw this one on to use.

FEATURES

-It's important that it's tight, but not too tight, which could damage it.

-For optimum performance, it is important to fill the Hellfire grenade to the maximum (it is possible to make about 3 shots with a sparclette).

-Performance also depends on the launcher used. Ideally, you should use the THOR launcher, but you can also use another launcher (you can get the same efficiency as the THOR launcher by making the GMR modification on your M203), in which case squeeze the trigger with a sharp pull.

-

the link to my profile: https://cults3d.com/fr/utilisateurs/D84CONCEPTS/cr%C3%A9ations

⚠ These models are subject to the rules of the CULTS site and reserved for strictly private use, any reproduction for commercial purposes is prohibited ie the sale of the model, a derivative or a printed version ⚠

Material for all parts: PETG

Printing direction: refer to images supplied with files

Media: Enabled

Layer height: 0.15mm

Filling: 100%.

If you don't like the internal fit with the ogives, use the scale tool on your Slicer.