Gardening just got fun with this cute little carrot patch 🥕🥕 Plant it on your desk, coffee table or wherever you need some fidgeting fun.

Here is how I arranged my print profile (notice that on plate #5 I arranged all 4 carrots to print together to cut down on purge waste):

Plate #1: Large Carrot (2 colors)

Plate #2: Small Carrot (2 colors)

Plate #3: Bed of dirt (1 color)

Plate #4: Planter box (1 color)

Plate #5: 2 Large Carrots, 2 Small Carrots (2 colors)

3D PRINTING SETTINGS

Layer Height 0.2mm

PLA works great

15% Infill

Note: I recommend printing the carrots on a smooth print plate (you can use a glue stick/hair spray to help with first layer adhesion if necessary)

“Assembly” is simple, when all the pieces are printed, simply place the bed of dirt in the planter box and add the carrots.

Dimensions of Large Carrot: collapsed 2 ½ in. x 1 ⅝ in.; expanded 5 ½ in x 1 ⅝ in.

Dimensions of Small Carrot: collapsed 2 ¼ in. x 1 ⅜ in.; expanded 4 ½ in. x 1 ⅜ in.

Dimensions of Bed of dirt: 7 in. x 2 ⅛ in. x 1 in.

Dimensions of Planter box: 7 ¼ in. x 2 ½ in. x 1 ¼ in.

Have fun printing!