Armadilo APC Light AFV
$8.00 Armadilo APC Light AFV
3D
Published 2024-03-06T10:10:15+00:00
The Armadillo APC/ Light AFV is primarily designed off French APCs like the VBMR and the German TPz Fuchs. The vehicle can be printed with the body separated or as one whole body and can be printed with or without the plow on the front. It comes with either a 7.62mm/50mm cannon on an automated “Can head” turret or with a water cannon for an urban riot control setup. Troop capacity consists of commander, driver, gunner and room for eight infantry with portholes to fire out in 35 degree fire arc with small arms.
Armor layout is 100mm frontal armor and 30mm side and back armor and 24mm roof and floor armor. The turret has 30mm armor and 20mm armor, but note the gunner sits below the gun and the gun is controlled by remote, so this armor is mainly to protect the gun. Top Speed is 113km/h and vehicle weighs in at 22000kg.
Weapon: 7.62mm/50mm cannon or a Water cannon.
Print size all together 154mm long 71mm wide 84mm tall.
Note: the turret has a bayonet mount so you do not need glue to put it on the model and so it can swivel however unlike some of my newer models the gun must be glued in place or it will fall out. However it is pretty snug fitting if you wish to leave it unglued and reposition the gun.
Instructions to put together this model can be found at https://youtu.be/0W_8Iidw7uE
| Date published | 06/03/2024 |
| Price | $8.00 |