A1 hotbed handle, convenient for manually sliding the hotbed. It is recommended to use high-temperature resistant filaments such as ABS for printing to prevent melting due to heat. It is necessary to replace the screw in the middle front of the heated bed with an M3×12 countersunk screw and secure the handle in place.

A1热床把手，方便用手推拉热床。建议使用ABS等耐温高的灯丝进行打印，防止受热融化。需要将热床前面中间的螺丝用一颗M3×12沉头螺丝替换掉并将把手固定住。