Conjunto de 3 hueforge de chicas dragon. las fotos no hacen justicia, se pueden descargar el stl por separado
Set of 3 dragon girls hueforge. The photos don't do it justice, you can download the stl separately
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Jayo Negro Transmission Distance: 0.3
PLA Smart Pale skin Transmission Distance: 5
PLA Overture Light Gray Transmission Distance: 0.7
PLA Jayo Negro Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
Swap Instructions:
Start with Negro
At layer #7 (0.64mm) swap to Pale skin
At layer #15 (1.28mm) swap to Light Gray
At layer #18 (1.52mm) swap to Negro
At layer #19 (1.6mm) swap to Red for the rest.