This is a mini football game that fits in your wallet. Good for a quick game while waiting in line, riding in the car, etc. You'll need to print 2 cards (and 2 score trackers if you choose that version). Please download and drop a like!

The underlying mechanic is more like Rock-Paper-Scissors than it is like real-world play-calling. If the defensive player guesses the exact play, the result is a turnover. If the defensive player guesses the exact opposite of the play, the result is a touchdown for the offensive player. See rules for more info.

For the FREE version with score tracker, check it out on Printables: https://www.printables.com/model/775150-mini-football-game-fits-in-your-wallet

Donations appreciated: https://buy.stripe.com/28o8AA8MDgAZ2VW6oo

RULES

1. Winning:

   • First to score 21 points wins.

2. Abbreviated Results

   • 7 = Touchdown
   • F = First down
     • 2 first downs (F) IN A ROW result in a touchdown.
   • Ø = No gain
     • 2 no gains (Ø) IN A ROW result in a turnover.
   • V = Turnover

3. Abbreviated Plays

   • There are 3 run plays and 3 pass plays.
     • InRun = Inside Run
     • Draw = Draw (a running play)
     • ShrPass = Short Pass
     • LngPass = Long Pass
     • TrkPass = Trick Pass
     • OutRun = Outside Run
4. Play-Calling
   • The offensive player chooses a play, and the defensive player guesses what the play will be.
   • Each player secretly places their thumb on their call and both reveal at the same time.
   • Overlay the cards such that the top card (with holes) reveals the result on the bottom card.
   • The plays should be placed one over the other.

• Example photo: The offensive player chose to do an Inside Run, while the defensive player expected a Trick Pass. The result was a first down (F).

PRINT SETTINGS

Sliced with Cura. Printed on an Ender 3. About 45 minutes per card with my settings.

Color Change

• If you have a single extruder, like me, you'll need to swap out colors after your printer completes the 0.75 mm (0.72 mm or 6th layer, using settings below).
• I'd recommend printing both cards in your desired color, then switch to white for the last couple layers.

Card without Tracker

• Layer Height: 0.12 mm (a finer resolution should work)
• Adhesion: Normal settings
• Infill: Doesn't matter
• Supports: No