Sexy beer Holder by Tommy

Tommy

Art>Other Art Models

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

Bottle 330ml. Diameter 62mm. Pla1.6mm. layer, 2 walls, 15% infill

Designer

5.2 h

1 plate

4.6(10)

Bottle 330ml. diameter. 62mm. pla 0.2mm layer 15% infil

Designer

4.9 h

1 plate

4.3(3)

Bottle 500ml. Diameter 67mm. Pla. 0.2mm layer, 2 walls, 15% infill

Designer

5.7 h

1 plate

1.0(1)

Bottle 500ml Diameter. 67mm. Pla. 0.16mm layer, 2 walls, 15% infill

Designer

6.1 h

1 plate

Boost

106

153

168

107

Released

Description

Simpatico porta bottiglie di Birra.

stampato in pla: sostiene bene il peso

(consiglio di mettere le bottiglie vuote per un lungo periodo di esposizione)

il modello si incastra perfettamente ma visto il peso delle bottiglie e meglio usare un p ò di colla!

infilare le bottiglie insieme, altrimenti si sbilancia. (non è possibile mettere una sola bottiglia)!

Attenzione a quando si tolgono, levarle in contemporanea.

non volete mica sprecare la birra ?

Diametro 62mm. max. 330ml

Diametro 67mm. max. 500ml

fatemi sapere nei commenti se vi e piaciuto, oppure se c è qualcosa che non va bene.

Una piccola recensione positiva, mi stimola a progettare con entusiasmo.

Buon divertimento.

Comment & Rating (18)

@eric_watson

Boosted

fantastic print !

@Mayor_Ivan

Print Profile

Bottle 330ml. diameter. 62mm. pla 0.2mm layer 15% infil

@Mayor_Ivan

Print Profile

Bottle 330ml. Diameter 62mm. Pla1.6mm. layer, 2 walls, 15% infill

@tayden.lewis.cl

Very disappointing. Print didn't finish the job completely and I was left with a half done project, it's so flimsy I would never trust bottles in it even if they are empty. I am extremely peeved at the waste of filament I have just used making this piece of rubbish!

The designer has replied

@giusto.tommi

non capisco come sia possibile. io ho stampati diversi pezzi di questo ed è sempre andato tutto bene . per quanto riguarda la tenuta. ricordo che il modello va incollato con colla compatibile con pla. (cianoacrilico) detto questo mi dispiace veramente . quale profilo hai usato ?

@fonomoxi

Boosted

Ciao🇮🇹 very nice object, to be improved to be able to remain upright even with just the bottle on the woman's side, perhaps by adding a base

@Divisonby

Print Profile

Bottle 330ml. Diameter 62mm. Pla1.6mm. layer, 2 walls, 15% infill

Thanks for this!

@user_2043446361

Print Profile

Bottle 330ml. diameter. 62mm. pla 0.2mm layer 15% infil

didnt fit together very good

@Thunder76

Print Profile

Bottle 330ml. Diameter 62mm. Pla1.6mm. layer, 2 walls, 15% infill

gut zu drucken, habe es danach aber auch geklebt. welde Flaschen passen gut rein, die Corona Flasche leider nicht. müsste ein klein bissl größer sein

@ilkaundjens

Print Profile

Bottle 500ml. Diameter 67mm. Pla. 0.2mm layer, 2 walls, 15% infill

hat alles hinten und vorne nicht richtig gepasst

@fonomoxi

Boosted

Print Profile

Bottle 330ml. Diameter 62mm. Pla1.6mm. layer, 2 walls, 15% infill

🇮🇹Ciao I love it, too bad that with just the bottle in the "feminine" part it doesn't hold up, perhaps with the addition of a long base it could

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(4)

Description

Comment & Rating (18)

License

Related Models

Sand drink holder

CO2 cartridges 12g beer crate

Holder for 4 or 6 cans. Simple and fast to print.

Beer Can Bee Protector BVB, S04, FCB, SGE