Hey,
I was printing the lovely Settlers Design from Dakanzla but i didnt want to use magnets, so i used the interlocking Base Design by MikeJacobi .
(https://www.thingiverse.com/thing:3700300)

I think the box is now finished, but if someone has a good idea i will improve it.

The Problem with Interlocking Design is, that the Tiles do not fit in the original box.
So i changed the Desgin and made it bigger now it can fit up to 36 land parts and around 50 water parts. By doing this you can now fit the main game and the seafarers exctention in it.
The hole box is hold together by magnets with counter parts in form of metal plates. The holes are 20mm wide and 7mm deep.

Amazon link:
https://www.amazon.de/dp/B08K39Q1DL?psc=1&ref=ppx_yo2ov_dt_b_product_details

The lid is supposed to be a 2 color print. the plate is 4mm thick and the text 1mm so if you slice the thing with a 0.2mm layer height you need a color change after layer 20. I printed mine in black and red.

if you want the whole setup you need to print: (From top to bottom)
-The lid (BoxLid)
-The Water part (WaterCatan)
-4x The pins (CatanPins)
-2x the Base part (SiedlerBoxBase)
-The Bottom box (CatanBottom)

The Bottom box is supposed to hold all the acessories:
To put all of the stuff in you need to print:
-6x Playing figures (PayingFiguresBox)
-Card Holder (CatanCardHolder)
-CardHolder Lid (CardHolderDeckel)

I added the necessary numbers they are also a 2 color print. Print them them in white and red/black, depending on the number. Thats the reason for the 2 stl files.