THIS MODEL FITS ONLY THE MAIN BODY OF THIS REMIX: 07/03/2024

Bambu Labs X1 Carbon - P1S Side Mount Spool Holder light Remixed by ineiub - MakerWorld   **

**since @ineiub updated his remix with a version with a longer arm, i added his old model in this remix. This becouse the original arm lenght is already perfect if you want to use the AMS lite spool holder mod.

Hi, i made this modified version of the spindle for the AMS Lite Spool Holder made by @ineiub becouse i noticed that the original spindle from @ryan.fransen just won't fit, so i have re-made it from scratch.

The spindle is divided in 2 parts so if the screw don't fit you can just try to scale a bit and re-print only that.

I highly suggest to print the screw part with 0.10 layer height to ensure a perfect fit!

The .3mf file i provided is already with my suggested printing settings.

You should glue together the 2 parts and use them with the @ineiub great remix that will make you save 2h of printing the original mod.

Depending if you have the 4-in-1 PTFE connector OR the AMS lite HUB you will need to print one of these mods:

Bambu 4-in-1 PTFE Adapter Bracket for Side Spool Holder by ryan.fransen - MakerWorld

OR

Side Mount "AMS lite" Spool Holder + Hub Remixed by TheMiguelBi - MakerWorld

For my situation (PTFE 4-1 + side spool holder), i used 3x M3x12 and 1x M3x16 screws

SHOPPING LIST for the whole installation:

• PC4-M10 connector, you can buy on Amazon/AliExpress
• piece of generic PTFE tube (I would say around 30 cm)
• GREEN AMS Lite Spool Holder from BL site
• 4-in-1 PTFE connector from BL site (notify yourself via email and buy it as soon as it is available because it is always out of stock) or, you can buy the classic AMS Lite Hub and use that with the other mod i linked. The operation is absolutely identical.