BANDOPROOF 2 // ACCESSORY // SCREEN PROTECTOR // GOPRO 11 mini

Bandoproof 2 FPV drone mount
Screen Protector Accessory for GoPro 11 mini 🚀

Please read this description and the printer info below carefully. If you have any questions please contact me on my Instagram *@yannik.fpv** or send me an email: Yannik.fpv@gmail.com*

❗️ Even if the mount is called "Bandoproof" and is designed as thoughtfully as possible, it does not protect the cam from every external influence. Too hard crashes and tolerances on the part of GoPro can still lead to a defective cam - nevertheless I think we have the best FPV drone mount.

Compatibility: The screen protector can be used with all horizontal GoPro 11 mini mounts from the Bandoproof-2 series. The screen protector comes in two versions. One completely closed. One with open corners (which still allow important information to be seen: Runtime, battery...).
➡️ compatible Gopro 11 mini Flexangle Mounts
➡️ compatible Gopro 11 mini FixMounts
➡️ compatible Gopro 11 mini FlexMounts

💥 The screen protector can simply be inserted into the cut-out in the mount for the top screen. In my tests, the screen protector always stayed in place during crashes and never flew off. A different TPU might make it a little less tight. But it is very easy and quick to print: I therefore recommend having 2-3 pieces on spare at all times.

The Screen-Protector is printed from TPU. Please do not (!) try to use any other material. 🖨

The exact settings for TPU depend on your printer and FIlament. Below I list some tips that I ask you to follow. Otherwise pay attention to the orientation of the STL in the printer - this is very important for the best quality of the mount.

0.2mm
2-3 walls (you can vary this)
10-50% infill (you can vary depending on the stiffness of your TPU and whether you want the mount to be softer/lighter)
Support: Yes! Everywhere

Print temperature: in the best case you print TPU very hot and ensure good cooling. On the P1P from Bambulabs I print the TPU between 240-250°. The temperature is very important: +/-5° can make a big difference - test beforehand what is the best setting for you. Check video for refference.

💦Wet TPU: TPU is very susceptible to absorbing moisture. Unfortunately. It is therefore very important to dry TPU well. Often it does not come completely dry from the manufacturer. So also dry fresh TPU directly. I recommend a filament dryer from e.g. Sunlu. If you don't have one, you can also use your oven to dry the filament at 50° & circulating air for 4-8 hours. Drying (but I highly recommend a dryer, they are really worth every penny). (See video for refference.)[https://www.instagram.com/p/C0lnslDI_F0/]

TPU Brand: You can use any 95A rated TPU. But TPU from different manufacturers always varies in stiffness. I highly recommend the TPU from 3DJake, it is comparatively stiff and has a matt finish. Other TPU, such as from SainSmart, is also very good and easy to print but is much softer and shinier/smoother which is unfavorable for FlexAngle and Flexmount.
Please use a hard TPU for printing the FlexMount. Softer TPU makes the mounting system very susceptible to crashes.

Support: Since it is very important for the model to use support, it should also be easy to remove. So test out what the best settings are for you.
Please use a hard TPU for printing the FlexMount. Softer TPU makes the mounting system very susceptible to crashes.

Support: Since it is very important for the model to use support, it should also be easy to remove. So test out what the best settings are for you.