Stranger Things Key Holder

Key holder with interchangeable plate from stranger things. In a while I will post more different models that can be used for this key holder.

The model in the image was printed on an Ender 3 with a single spike. it includes a version for color change by height.

Happy Printing!!!

It is anchored to the wall with two screws that are hidden behind the frame.

Activate Z-hop, Z-jump, 1mm.

There are 3 printing methods

1- AMS, Multi material, etc.

a- Use MMU_AMS plate.3mf file load file as single object with multiple parts.

b- In this method you only need to set the color of each part, the color is shown in the name of each object, but you can change it as you wish.

c- Preferably print the front side downwards

2- Several colors with a single spout.

a- With the MMU_AMS plate.3mf file, several Gcodes must be generated, one for each color with z-hop of 1mm or more activated.

  Example:


         1- Cable_wire_black.gcode


         2-Blue.gcode


         3-Green.gcode


         4-Red.gcode


         5-Background_Background.gcode

b- To generate each gcode you have to delete the parts that do not correspond to the color to be printed.

c- Print the front side down

3-Color change by height.

a-The traditional method of changing color by height. The Stranger things color changes.stl file is used.

b- Change color from layer heights. The first color change must be made starting at 3.2mm.