M&M SHIFTER - 3 files for Large to Small Scales! 1/8 to 1/25 Scales

M&M SHIFTER - 3 files for Large to Small Scales! 1/8 to 1/25 Scales
FOR DRAG , HOT RODS, MUSCLE CARS, ROCK CRAWLING, SHORT COURSE TRUCK AND DESERT RACING.

You are looking for the ultimate shifter for drag racing and Hot Rods. This shifter, made by M&M Transmissions is truly a work of art! M&M Transmissions is well known in the drag racing community to provide some of the best transmission components!

The design come in 3 flavors tailored to print good in different scales.

For Large Scales - - Bigger than 1/10
For Medium Scales 1/10 to 1/18
For Small Scales - Smaller than 1/18 for example 1/25

THE SHIFTER ONLY - THE REID RACING SH400 GEARBOX IS AVAILABLE AT:
https://cults3d.com/en/3d-model/game/reid-racing-sh400-gearbox

You print this as a one piece. I perfected the design for one piece printing, getting better results than split in parts even on FDM printers. Designed to be Printed in Both FDM (1/12 Scale and above) and Resin (SLA).

I give the files in Full Size Scale (Real Life Size) so you can scale it easily to your needs and modelling scale in the slicer.

Conversion to your required scale is much easier from full size. Example:1/10 Scale will be 10% size in the slicer. See the Scaling Guide Below.

3D printing settings

Prints Good with Filament (FDM) Printers in the bigger scales.
SLA or smaller nozzle (0.2mm) recommended for below 1/12th Scale.

For 1/6, 1/8, 1/10, 1/12, 1/16, 1/18, 1/24, 1/25 Scale.

Files come Actual Full Size. Scale Factor Table below:

1/6 = Scale to 0.166 (16.6%)
1/8 = Scale to 0.125 (12.5%)
1/10 = Scale to 0.100 (10.0%)
1/12 = Scale to 0.083 (8.3%)
1/16 = Scale to 0.062 (6.2%)
1/18 = Scale to 0.055 (5.5%)
1/24 = Scale to 0.0416 (4.16%)
1/25 = Scale to 0.040 (4.0%)