Legend of Zelda Ocarina of Time - Din's Fire/Farore's Wind/Nayru's Love

I wanted so badly to have the three magic spells from my all-time favorite game, Ocarina of Time. After a lot of searching, there just was nothing available. SO, I did my best here to recreate them.
I cannot print in resin, nor have I ever done so, but I imagine these can be resin printed for greater clarity. Also open to any ideas to increase the clarity, although the effect I get from the non- post processed outer shell gave me more of a feeling like I was looking at the item(s) as they appeared in-game: a hazy, nostalgic clarity.

These were printed on an Elegoo Neptune 4, with .28mm layer height at 50mm/s. Make sure to set them to ZERO infill and no supports, and print in clear filament. The item is a single STL, printed 6 times, and the inner spheres were painted with 2 coats of enamel paints. The pieces were then glued together with StarBond MEDIUM Cyanocrylate adhesive (about $10 on amazon).

The stands were designed to fit these as closely as I could (I am no 3D modeler/artist) and they do a decent job holding these. They were printed on Bambu Lab X1-Carbon with 0.2mm layer height and no brim or support necessary. I 'painted' the words using my multi-color 3d printer, but you may elect to just paint the letters yourself, or re-orient and do a manual filament swap for the letters (harder). Your call.