Clamp Ghost (鉗鬼)

3D Models

Characters & Creatures

Dark Fantasy

Clamp Ghost (鉗鬼)

bio

4.05 K

Clamp Ghost (鉗鬼)

Content: 1 model 29 parts

[Standard Printing Speed]

Printer: Sonic Mega 8K S

Resin: Aqua Gray 8K

Layer Height: 0.03mm

Exposure Time: 2.3s

Bottom Exposure Time: 35s

Rest Time After Retract: 4s

Bottom Lift & Retract Distance: 8mm

Lifting & Retract Distance: 7mm

Normal & Bottom Layer Lift Speed: 45mm/min

Normal & Bottom Layer Retract Speed: 150mm/min

Model Size

Polygon

Tags

$ 20.99 $ 27.29

Ready-to-Print File

Included Type

Pre Supported

Non Supported

Sliced

Printer Type (For Sliced Type Only)

Mighty 12K Mega 8K S Mighty 8K Mighty 4K Mini 8K Mini 4K

Original stl file

Included

Included Format

Color dependent plot style table (.ctb) (5 files)

2.8 GB

CTB Disclaimer

Models are pre-sliced with a 90% success rate and compatible ONLY with Aqua-Gray 8K for Sonic Mini 8K, Sonic Mighty 8K, Sonic Mega 8K, and Sonic Mega 8K S printers, while Aqua-Gray 4K is for Sonic Mini 4K and Sonic Mighty 4K printers. Since these files are pre-sliced with a temperature of 25°C and relative humidity of 75%, risks of failure due to variations in printing environments may significantly increase with higher discrepancies. Please also note that your models might not be printed when you are printing with resins or printers not mentioned above. In addition, printer types for this file are limited to those shown in the descriptions. If you encounter any issues, please go to PIXUP Help Center .

Add to cart

Share to

Promotion