Easter Bunny Rabbit Chick Plastic Egg Holder 3D STL

These cute Easter Bunny Egg Holders are easy to print and easy to load. There are two files to choose from - one with ears up and one with ears flopped over. Most plastic easter eggs will fit. The smaller variety balances easily inside the hole, while the larger ones pop snugly into place (extra large eggs will not fit). They even hold real eggs, medium to Extra Large size, as well as Cadbury candy eggs.

Now Four Egg Holders in All - 2 Bonus Files!
There are now four egg holders included in the STL file pack. The original two are standing, forward facing bunnies, with their bellies cut out to hold easter eggs. One has his ears up, and the other has his ears flopped over and down. Don't worry - they print on their back, so neither one requires supports!

The two Bonus Files are another bunny, facing sideways, and a cute little chick. The sideways bunny has his back cut out to lay an egg in at an angle. The Chick Egg Holder is cut to hold an egg standing up on his back. Both of these are great for holding eggs of almost any size!

DIMENSIONS
At 100% scale, the easter egg holders measure:

Bunny Egg Holder - Ears Up (See Inside Diameter Below)
X = 13.6cm (5.4in)
Y = 7.0cm (2.8in)
Z = 3.0cm (1.2in)

Bunny Egg Holder - Ears Down (See Inside Diameter Below)
X = 12.9cm (5.1in)
Y = 7.7cm (3.0in)
Z = 3.0cm (1.2in)

Inside Diameter (Maximum Egg Size)
X = 4.37cm (1.7in)
Y = 5.93cm (2.3in)

Bunny Egg Holder - Sideways (Open Top)
X = 10.6cm (4.2in)
Y = 9.0cm (3.5in)
Z = 3.0cm (1.2in)

Chick Egg Holder (Open Top)
X = 9.9cm (3.9in)
Y = 10.4cm (4.1in)
Z = 3.0cm (1.2in)

Enjoy!

Be sure to Follow GetPrinted3D on Cults3D for more unique 3D printable holiday designs.

• See All GP3D Creations on Cults3D

IMPORTANT: Unless otherwise noted, ALL GetPrinted3D designs are Copyright protected. When you purchase a file, you do NOT have the right to sell the file or printed model. Files may not be redistributed under any circumstances. The models are for personal and private use, and may not be sold commercially without the explicit written consent of GetPrinted3D.

You can obtain a Commercial Resell License to print and legally sell our designs (not the files!) here:

• Patreon.com/GetPrinted3D

Layer Height: 0.2
Walls: 3
Infill: 15% Cubic Subdivision / Gyroid
Speed: 60
Supports: No
Raft: No