Racing Big Block Chevy with High Rise Holley. 1/8 TO 1/25 SCALE

Racing Big Block Chevy with High Rise Holley. 1/8 TO 1/25 SCALE

This engine can be any Cubic Inch you wish it to be from 427 to even 632ci and even stroked bigger! The answer to the needs of racers and performance enthusiasts! Big Block Chevy with an open valley design High Rise inlet for maximum charge cooling, the Single Plane Hi-Rise cast aluminum inlet manifold gives this Big Block MAX POWER. Comes with bosses for use with EFI injectors or N2O nozzles if required, plus an Electric Water-pump to save more crank Horsepower. MSD Racing Distributor and more Racing Goodies.

DISCOUNTED FOR A FEW DAYS ONLY!

CUSTOMIZE THE LOOK AS YOU WISH!
With Choice of 3 Custom Valve Covers Chevy Racing, Finned Chevy and Dart Racing Valve Covers.
Two Styles of Exhaust Manifolds. Twisty Racing Version PLUS Classic Racing Style Headers.
Plain And Valley Finned High Rise inlet manifolds to choose from.

This model represent an Big Block Chevy V8 Engine as would be used for Oval Track Racing, Track Racing, Hot Rods and Drag Racing. Also will be fitting for some Bonneville racers.

About 35 STL Files are included, to make you a impressive and fun to build model, that can be used for display by itself, or fitted to your Hot Rod build. (Some STL Files included are options, making about 32 to print) A completely assembled STL file is included as to be used as a assembly guide. Designed to be Printed in Both FDM (1/12 Scale and above) and Resin (SLA).

I give the files in Full Size Scale (Real Life Size) so you can scale it easily to your needs and modelling scale in the slicer. Conversion to your required scale is much easier from full size. Example:1/10 Scale will be 10% size in the slicer. See the Scaling Guide Below.

This is an advanced project that require printing of separate parts, almost like a model kit. To use suitable sized electric wire for spark plug wiring.

Racing Chevrolet Big Block V8 with High Rise, Flat Plane Manifold and Holley.
Copyright retained by BuildandClick.com, Intended for personal use, not to be redistributed. No Mods, Remixes or Digital Variants to be sold. To sell Prints you need to contact me for an commercial license.

3D printing settings

3D printer file information ( 136 MB Zip File)
Prints Good with Filament (FDM) Printers in the bigger scales.
SLA or smaller nozzle (0.2mm) recommended for below 1/18th Scale.

For 1/6, 1/8, 1/10, 1/12, 1/16, 1/18, 1/24, 1/25 Scale.

Files come Actual Full Size. Scale Factor Table below:

1/6 = Scale to 0.166 (16.6%)
1/8 = Scale to 0.125 (12.5%)
1/10 = Scale to 0.100 (10.0%)
1/12 = Scale to 0.083 (8.3%)
1/16 = Scale to 0.062 (6.2%)
1/18 = Scale to 0.055 (5.5%)
1/24 = Scale to 0.0416 (4.16%)
1/25 = Scale to 0.040 (4.0%)