Henry Hoover Novelty Planter/Desk Tidy

Features:

• Scale model of a real Henry Hoover
• 10cm diameter
• Functional wheels
• Split into multiple pieces for easy printing
• Push fit assembly
• 100% 3D printed
• No AMS needed* (black text only)
• Strong and durable design
• Indoor or outdoor use
• Centre hole for plant drainage (Add a dish underneath to collect water)

Assembly Tips:

• Refer to the pictures for where the parts go.
• You can't particularly mess it up as everything will only fit in its designated position (Wheels and wheel adaptors are identical so can be used on left or right sides)
• Press the mouth in from the large side first and continue to firmly push along the mouth until it is fully seated (Don't be afraid to give it a tap with a hammer to fully seat it).
• The eyes will press fit in place with two separate parts. If they are slightly loose and want to fall out whilst moving Henry, then simply add a small amount of superglue and re fit.
• Refer to the pictures for instructions on how to secure the rear wheels in place.

Thanks for looking!

Please rate and review your printing experience :)