Mega Truck v1
Copyright Claim
Mega Truck v1
Boost
218
321
14
Print Profile(5)
A1 Mini - 0.2mm layer, 2 walls, 15% infill
2.9 h
1 plate
85%scale/no Frame/skippable .2mm layer, 2 walls, 10% infill
2.7 h
1 plate
Scaled 75% - 0.2mm layer, 3 walls, 15% infill
4.2 h
1 plate
2 Plates - No Frame - 0.16mm layer, 2 walls, 15% infill
7.9 h
2 plates
Click to see more
Boost
218
321
14
1
781
116
Released
Description
Model kit car representing a mega trucker. For best results, use PLA with a low profile (.08 or .12). If you want to get more details out of the model, scale it up to your build plate or separate the parts. When printing with a .2 profile some parts will need a bit of sanding to fit perfectly. Included an image of a test run .2 print scaled at ~11.5x7cm for reference. Enjoy!
Comment & Rating (14)
All
Print Profile
A1 Mini - 0.2mm layer, 2 walls, 15% infill
Looking awesome very easy to print.
1
Reply
have fun with axles ^^ they don't hold together
0
Reply
Print Profile
85%scale/no Frame/skippable .2mm layer, 2 walls, 10% infill
Endlich mit Erfolg 😁 hier passt alles zusammen und die Achsen sind super gemacht.
The designer has replied
1
Reply
danke...hatte auch Kontakt zum Designer der selber sagt is top... versteh nicht warum man dann nicht die anderen Profile löschen lässt...die Leute drucken und können es dann wegschmeißen
0
Reply
Print Profile
2 Plates - No Frame - 0.16mm layer, 2 walls, 15% infill
printed well joiners will need some sanding might need to be undersized slightly
2
Reply
Nice model, but the build is difficult. The hinge pins at the rear are tedious and break easily. The axels are very loose in the body and difficult to connect inside.
The designer has replied
0
Reply
Hello! Mind sharing a photo of your actual print output? Makes it easier for me to help out and identify potential problems
0
Reply
try the profile with the modified axels
0
Reply
Print Profile
A1 Mini - 0.2mm layer, 2 walls, 15% infill
Tough to build.
0
Reply
Print Profile
A1 Mini - 0.2mm layer, 2 walls, 15% infill
love it
0
Reply
Print Profile
85%scale/no Frame/skippable .2mm layer, 2 walls, 10% infill
The designer has replied
1
Reply
hy...any Problems?
0
Reply
Print Profile
A1 Mini - 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
Scaled 75% - 0.2mm layer, 3 walls, 15% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Share AlikeRemixes (1)
Related Models
© 2024 MakerWorld