The "Mystic Puzzle Egg Safe," a 3D-printed Easter egg designed with a “twist”, or 3. This egg features a simple and engaging mechanism: three rotatable discs that foll that follows the shape of the egg. To unlock the egg and reveal the hidden compartment inside, these discs must be rotated to align correctly. It's a simple, engaging puzzle perfect for hiding Easter surprises. It can be a fun and playful challenge to get some treats, or simple use to hide something else.

!!!Importantly for future use all combinations of egg patterns will be added!!!

If you want to change the “code” to access the egg safe you have to change the location of holes in the included egg_topv3 step file.

The recommended settings are:

• 0,16 mm layer height
• 15% infill (or more)
• Brim on for rotational egg parts.

Printables:

• Egg_bottomv2
• Egg_topv3
• Layer_1_(any pattern)
• Layer_2_(any pattern)
• Layer_3_(any pattern)
• Layer_4

Assembly:

1. Press Layer_1 down on top of the Egg_bottom, it needs to be pressed hard, until it snaps unto the “rail”.
2. Press Layer_2 down on top of the Egg_bottom, it needs to be pressed hard, until it snaps unto the “rail”.
3. Press Layer_3 down on top of the Egg_bottom, it needs to be pressed hard, until it snaps unto the “rail”.
4. Press down Layer_4 on top of the Egg_bottom.
5. Insert the egg_top, rotate each layer until in can slip through to the next layer a note the orientation of the egg_layers, this will be the “code” to get into the egg.

The code for the base model is

6.5

3

9.5

or look at the bottom picture for reference, (small arrows are on the outside of each layer to indicate the postion)