This model was made to hold loose disposable or an actual box of Mr. Clean disposable gloves.

Below is the link to the product I used to model the dimensions.

https://www.walmart.com/ip/Mr-Clean-Biodegradable-Nitrile-Disposable-Gloves-50-Count-Blue-One-Size-Fits-Most/1779722282?wl13=4399&selectedSellerId=0

The dimensions of the opening are as follows:

62mm X 117mm X 151mm

2.44in X 4.61in X 5.945in

I made 2 variations of this box, 1 in a vertical orientation which I have printed and tested and in a horizontal orientation that I have not printed or tested. I approximated to the best of my ability to have the direct connects fit in a horizontal orientation.