Gyro Fidget Spinner V2 by 3D Print Bros

3D Print Bros

Toys & Games>Other Toys & Games

GIF

Print Profile(14)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 4 walls, 45% infill

Designer

44 min

1 plate

4.9(577)

PLA - 100% infill

52 min

1 plate

5.0(72)

Slowed for quality , Scaled 105% 0.16mm, 100% infill

59 min

1 plate

5.0(55)

AMS Stripe 0.16mm layer, 4 walls, 45% infill

45 min

1 plate

5.0(21)

Click to see more

Boost

760

1215

833

4.4 k

5.8 k

Released

Description

V2 of the Gyro Fidget Spinner is here! Please use the print profile for best results. Bambu Labs Basic PLA gives me the best results, but most PLAs should work just fine. My prints got spinning right away, but if your rings don't spin freely, first try breaking it in a little. If it doesn't break in within a few minutes, re-print it with reduced flow ratio or perform flow calibration. Results will vary depending on filament used.

Improvements include:

Relocated Z seams
Optimized tolerances
Longer spin times
Quieter smoother spinning
Faster print time

Commercial selling license now available!!

Check out the JUMBO version here! Or if you're more a miniature person, I have you covered with the Micro.

gyro

gyro fidget

fidget

Comment & Rating (833)

@ares3d_ca

Print Profile

AMS COLOR (top and bottom) matches JUMBO version of same

They look great! Prusament PLA Oh My Gold silk looks good against the Sandoz PLA Dark Blue. They spin without effort straight off the plate.

@rachelareitz

what profile did you use?

@ares3d_ca

Replying to @rachelareitz :

I used the AMS profile listed.

@theinkspiration

Boosted

Those look SICK!

(Edited)

@cicciociaccia

Print Profile

PLA - 100% infill

perfetti scorrono benissimo

@ozskeeter

Boosted

Print Profile

0.16mm layer, 4 walls, 45% infill

Great feel in the hand, parts move freely, fantastic design 🙏🥰

The designer has replied

@waveE

Awesome silk filament, your prints look great! Appreciate the feedback <3

(Edited)

@brianbhackett

Print Profile

0.16mm layer, 4 walls, 45% infill

Printed great both in Bambu PLA and Bambu Matte PLA. Surprisingly the Matte is even smoother than the regular PLA and there is no “rattle” from the pieces touching as they spin.

The designer has replied

@waveE

Interesting! I'll have to order me some Bambu matte to try myself, thanks for the feedback :)

@widiqdiw

Printed in X1C using Sunlu PC filament, all speed and acceleration reduced to 20%, chamber pre-heated to 50C, add 5mm inner and outer brim because I had bed adhesion problem

(Edited)

The designer has replied

@waveE

how’s it spin? haven’t had a chance to try printing in PC

@widiqdiw

Rotates freely, but only able to spin freely if I squeze the ring slightly, need larget tolerance for PC filament

@cubethecuber

Print Profile

0.16mm layer, 4 walls, 45% infill

Printed cleanly with no issues. Spins excellently!

The designer has replied

@waveE

Awesome! Thanks for printing :)

(Edited)

@Joosdt

Print Profile

0.16mm layer, 4 walls, 45% infill

I'm printing a lot of different fidgets, this is one of the better ones.

The designer has replied

@waveE

I'll have to agree with you ;) Thanks for printing!

@VagueDustin

Print Profile

AMS COLOR (top and bottom) matches JUMBO version of same

I've printed out about a dozen of these with zero problems. Fantastic print, very smooth right off the print bed. Thanks!

The designer has replied

@8BitTitan

If you love it, please consider boosting the model for the original designer :)

@raven_ultra

Print Profile

0.16mm layer, 4 walls, 45% infill

came out great, but smaller than expected

The designer has replied

@waveE

this big enough for you? https://makerworld.com/en/models/393051#profileId-294200

(Edited)

@MikePrints3D

Print Profile

Slowed for quality , Scaled 105% 0.16mm, 100% infill

Good quality model. Printed easy.

The designer has replied

@tdulny

thanks you, have a nice day! :)

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.