No Print Profile yet. Add one to earn points.
You need to redo some wires because the original wires are too short!
Based on the updated version on Printables, I used Tinkercad - Copy & Edit Thing - to disassemble and customize the case into individually printable parts. It is held together with hot melt inserts and M3x6mm screws. For the support strut 2x M3x8mm are needed. The fans are 92mmx14mm, but everything can be customized to your liking. It is not perfect! Because I designed the PSU cover, based on this, first and didn't think about the rest, the sides of the cover are not connected to the rest of the case and therefore “loose”.
This was printed on a Sunlu S8 Pro with 310x310 build plate.
Sunlu S8 Pro
This was printed on a Sunlu S8 Pro with 310x310 build plate.