Hier habe ich für euch ein Hueforge Bild mit einer Giraffe drauf.Der super Löwe ist in meinem Profil

Die Giraffe habe ich 2017 fotografiert
Zur Zeit noch in 100x100 millimeter.Wer es größer möchte, kann mir gerne schreiben.

Inkl. meinem besten PETG Profil

und gedruckt mit PETG falls es in der Sonne hängt oder das Bild auch mal raus darf.
Die STL liegt auch bei.

Bitte beachten:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm Höhe der ersten Schicht.

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PETG JAYO Gray Transmission Distance: 2.5
PETG GEETECH Gray Transmission Distance: 3
PETG JAYO White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Gray
At layer #13 (1.12mm) swap to Gray
At layer #18 (1.52mm) swap to White for the rest.

---------------------------------------------------------------------------------------------------------------------------

Here I have a Hueforge picture with a giraffe on it for you.

I photographed the giraffe in 2017
Currently still in 100x100 millimeters.If you would like it bigger, please write to me.
Incl. with my best PETG profile

and printed with PETG if it is hanging in the sun or the picture came come out.
The STL is also included.

Please note:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm height of the first layer.

Filaments used:
PETG JAYO Black Transmission Distance: 0.3
PETG JAYO Gray Transmission Distance: 2.5
PETG GEETECH Gray Transmission Distance: 3
PETG JAYO White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Gray
At layer #13 (1.12mm) swap to Gray
At layer #18 (1.52mm) swap to White for the rest.