Gorch Fock is the name of two German sailing tall ships, three-mast barques, painted in white. Both ships are named in honor of the German writer Johann Kinau who wrote under the pseudonym "Gorch Fock" and got killed at sea in the Battle of Jutland.

The first, originally built as a school ship for the German Reichsmarine in 1933, was handed over to the USSR after World War II and renamed "Tovarishch". After the dissolution of the Soviet Union, she sailed under the Ukrainian flag from 1992 to 1993. In 1995, she was transferred to Newcastle-upon-Tyne for repairs which, however, somehow never even began.

In 1999, she was moved to Wilhelmshaven and finally acquired by private sponsors and transferred to her original home port Stralsund, Germany, where she was re-baptized Gorch Fock on November 29, 2003. She is a museum ship today, and although efforts are being made to reactivate her, it is doubtful whether she will ever sail again.

If you like to scale, do it only with x and y axis, do not change z axis!

Print at 100% infill with a layer height of 0.08mm and a base layer of 0.16mm
Wallgenerator is set to “Classic” for better results slice with "Arachne"
You can use a 0.2mm noozle, just leave all other settings as they are.

Filaments Used:
PETG BambuLab Basic Black Transmission Distance: 0.3
PETG BambuLab Basic Blue Transmission Distance: 2.5
PETG BambuLab Basic Lake Blue Transmission Distance: 4
PETG BambuLab Basic Nature Transmission Distance: 8

Swap Instructions: if you don't have ams just put pause on specified layers and swap filament manually
Start with Black
At layer #10 (0.88mm) swap to Blue
At layer #14 (1.2mm) swap to Lake Blue
At layer #19 (1.6mm) swap to Nature for the rest.

If you wanna use PLA:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Marine Blue Transmission Distance: 2.0
PLA BambuLab Basic Blue Transmission Distance: 4.0
PLA BambuLab Basic Beige Transmission Distance: 8.0

Just leave all other settings as they are.

I wish you always a clean nozzle!