Zombicide 2nd Edition Top layer inserts set by StuartGG

StuartGG

Toys & Games>Board Games

Print Profile(0)

No Print Profile yet. Add one to earn points.

+ Add Print Profile

Boost

Released

Description

Zombicide 2nd edition top box organizer

This assumes that you already have something for the bottom of the box to hold some of the tokens and dice. I am using this one for that.

It fits all the original board game zombies and bits and some space for extra pieces for expansion boxes

Houses:

Character trays
Cards (separated by type with extra space for more if needed)
Car tokens (Plenty of space for extra cars)
Character sheets (Plenty of space for extra characters)
6x Character color set
8x Abomination (original comes with 4)
96x Zombies and survivors models (Original comes with 84)

This is what you will need:

1x StdAndHeroesRack
2x StdZombieRack
3x Cap (Optional to hold the zombies in place better)
6x CharPieces
1x CardHolderInsert
1x CharacterTrayInsert
4x AbominationRack

The StdAndHeroesRack is slightly taller than StdZombieRack To accommodate for the taller Fatties and Amy's Katana which is very long, so be careful with those.

None of the models need support to be printed if oriented correctly.

The character trays seem bug but try putting them diagonally in the plate and they should fit.

Make sure to add pads on the corners to avoid bed adhesion issues.

If you have any questions just leave a comment :)

zombicide 2nd edition

zombicide second edition

Comment & Rating (5)

@user_410915084

Amazing design, I am hoping to print it soon. The tray for the cards could have more space and also be slightly wider inside to accomodate cards with sleeves. Very nice approach otherwise and holds extra stuff

The designer has replied

@StuartGG

thx! I can add more spaces for that if you have the dimensions of the sleeves I'll create a version for that too always intended to do that anyway when I have more cards and/or sleeves

(Edited)

@user_410915084

Replying to @StuartGG :

nice, the sleeves are 41 x 63 (Mini USA) you can probably max out the hollow space in the cards tray to hold more. which software do you use btw?

@StuartGG

Replying to @user_410915084 :

Cool, I'll see what I can do when I have some spare time Maxing out the space would make the cards flop around in there and eventually get out of the insert, not very good Do you have a caliper to measure the thickness of the decks with the sleeves?? Separate I mean, the zombie deck, the equipment deck, the pimp weapons deck, and the rest of the cards all together (think is the car card and abomination) For that I used Fusion360, experimenting with OnShape tho