手持两用三脚架
Copyright Claim
手持两用三脚架
Boost
0
0
1
Print Profile(3)
0.2mm layer, 3 walls, 100% infill
Designer
4.8 h
2 plates
0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill
Designer
1.1 h
1 plate
0.2mm layer, 6 walls, 25% infill
Designer
2.8 h
2 plates
Boost
0
0
1
0
10
0
Released
Description
建议使用含碳纤材质打印，脚垫和防滑垫使用TPU材质，五金件需要M3*10内六角螺丝三个，黄铜滚花螺母三个，M3*20内六角螺丝一个。M3*20螺丝需要拧到1/4相机螺栓内部再拧紧到三脚架上。
Comment & Rating (1)
License
This work is licensed under a
Creative Commons Attribution-Share AlikeRelated Models
© 2024 MakerWorld