Generated with img2go
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Sunlu Matte Black
PLA Sunlu Matte Dark Grey
PLA Elegoo Matte Grey
PLA Eryone Matte Light
PLA Eryone Matte White
Swap Instructions:
Start with Black
At layer #8 swap to Dark Gray
At layer #10 swap to Grey
At layer #12 swap to Light Grey
At layer #16 swap to White for the rest.
Use the .3mf file for generic PLA since Bambu doesn't allow custom filaments and change to what you've got in the slicer. For any other settings I used my thanks go to @Don Mantis because I used the same settings as for his art except the top and internal infill, there I use aligned rectilinear to get and even pattern all around.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.