Out of curiosity, I designed several intake manifolds for SACHS mopeds. Surprisingly, most of them not only function effectively but have also been in use on various mopeds for several months already!

1 | IMPORTANT ||||||||||

• Printed on a Bambu Lab XC1
• All printed in PAHT-CF by Bambulab
• Support is needed, but not on the entire body; draw them yourself or use the 3mf File
• I take no responsibility for any damage done to your moped by my designs; use caution!
• Always check the law if you're allowed to install them; also, here I take no responsibility if you get in conflict with your local law. I suggest only using it for showcasing purposes.
• They might not fit well on your moped; every moped is different. I suggest printing it in PLA first to check if the manifold fits your setup.
• You will need to tap a thread in the Arm; tap drills can be found everywhere.
• Some sanding might be needed

2 | PRINT SETTINGS ||||||||||

• Walls: 6
• Infill: 99%
• Infill Pattern: Gyroid
• No Brim
• Support: Tree (manual)
  Orientation: Upstanding

3 | DRAW SUPPORTS ||||||||||

If you like this Design, share some Love 🧡 & leave a Like 👍