USS Independence was a wooden-hulled, three-masted ship, originally a ship of the line and the first to be commissioned by the United States Navy Originally a 90-gun ship, in 1836 she was cut down by one deck and re-rated as a 54-gun frigate.
If you like to scale, do it only with x and y axis, do not change z axis!
Print at 100% infill with a layer height of 0.08mm and a base layer of 0.16mm
Wallgenerator is set to “Classic” for better results slice with "Arachne"
You can use a 0.2mm noozle, just leave all other settings as they are.
Filaments Used:
PETG BambuLab Basic Black Transmission Distance: 0.3
PETG BambuLab Basic Blue Transmission Distance: 2.5
PETG BambuLab Basic Lake Blue Transmission Distance: 4
PETG BambuLab Basic Nature Transmission Distance: 8
Swap Instructions: if you don't have ams just put pause on specified layers and swap filament manually
Start with Black
At layer #10 (0.88mm) swap to Blue
At layer #14 (1.2mm) swap to Lake Blue
At layer #18 (1.52mm) swap to Nature for the rest.
If you wanna use PLA:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Marine Blue Transmission Distance: 2.0
PLA BambuLab Basic Blue Transmission Distance: 4.0
PLA BambuLab Basic Beige Transmission Distance: 8.0
Just leave all other settings as they are.
I wish you always a clean nozzle!