Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA JAYO Black Transmission Distance: 0.3
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA BambuLab Basic Red Transmission Distance: 4
PLA JAYO White Transmission Distance: 6

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Marine Blue
At layer #9 (0.8mm) swap to Red
At layer #17 (1.44mm) swap to White for the rest.