Skip to content

Modular office storage

3.jpg Modular office storage
1.2.jpg Modular office storage
2.jpg Modular office storage
GIF-PT.1.gif Modular office storage
GIF-PT.2.gif Modular office storage
1.2.jpg Modular office storage
1.1.jpg Modular office storage
4.3.jpg Modular office storage
5.jpg Modular office storage
1.3.jpg Modular office storage
1.5.jpg Modular office storage
1.8.jpeg Modular office storage
NOTICE-1.2.jpeg Modular office storage
NOTICE-2.2.jpeg Modular office storage
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 1.9k views
  • 12 likes
  • 1 download
License
3D design format
ZIP Folder details Close
  • PRINT.zip

Learn more about the formats
Publication date 2024-03-14 at 16:26
Design number 1854483
FORJ

FORJ

3D printer file info

3D model description

Set of modular elements for office organization and storage.

Modulate the elements as you wish, according to your needs. The name of each module appears in the last two photos:

  • Pencil pot: P.1;

  • Post-it holder (76 X76X 45 mm) and hidden storage: P.2 (A/B);

  • Scotch tape holder and pot: P.3 (A/B/C/D/E);

  • Helmet holder: P.4 (A/B/C/D/E);

  • Telephone holder: P.5 (to be placed on P.1and P.2);

  • Ring holders: S.1, S.2, S.3, S.4 and S.5 (depending on the number of elements required, from 2 to 5 elements).

It's up to you!

See more on Instagram: https://www.instagram.com/p/C4gGD24ujjy/

Set of modular elements for office organization and storage.

Modulate the elements as you wish, according to your needs. The name of each module appears in the last two photos:

  • Pencil cup: P.1

  • Post-it holder (76 X76X 45 mm) and hidden storage: P.2 (A/B)

  • Scotch tape holder and pot: P.3 (A/B/C/D/E)

  • Headphone holder: P.4 (A/B/C/D/E)

  • Telephone holder: P.5 (to be placed on P.1and P.2)

  • Ring holders: S.1, S.2, S.3, S.4 and S.5 (depending on the number of elements required, from 2 to 5 elements)

Now it's your turn!

More about the creation on Instagram: https://www.instagram.com/p/C4gGD24ujjy/

3D printing settings

CONSEILS D’IMPRESSION:

  • Fichiers STL et OBJ disponibles;

  • Les tests d’impression et prototypes ont été réalisés avec du PLA+;

  • Bien nettoyer les pièces avant de les emboîter;

  • Paramètres pour chaque pièces (seulement 3 pièces avec supports, simples à enlever). Libre à vous de faire varier la densité de remplissage et la résolution pour des pièces plus ou moins finies:

    P.1 (115g minimum): Pas de supports / Résolution 0.12mm recommandée (possible en 0.2mm) / Densité de remplissage libre;
    P.2/A (93g minimum): Supports (simple à enlever) / Résolution 0.12mm recommandée (possible en 0.2mm) / Densité de remplissage libre;
    P.2/B (55g minimum): Pas de supports / Résolution 0.12mm recommandée (possible en 0.2mm) / Densité de remplissage libre;
    
P.3/A (78g minimum): Pas de supports / Résolution 0.12mm recommandée (possible en 0.2mm) / Minimum 10% de densité de remplissage;
    P.3/B (35g minimum): Pas de supports / Résolution 0.12mm recommandée (possible en 0.2mm) / Densité de remplissage libre;
    P.3/C (5g minimum): Pas de supports / Résolution 0.12mm recommandée (possible en 0.2mm) / Minimum 10% de densité de remplissage;
    P.3/D (5g minimum): Pas de supports / Résolution 0.12mm recommandée (possible en 0.2mm) / Minimum 10% de densité de remplissage;
    P.3/E (2g minimum): Pas de supports / Résolution 0.12mm / Minimum 10% de densité de remplissage;
    
P.4/A (83g minimum): Pas de supports / Résolution 0.12mm recommandée (possible en 0.2mm) / Densité de remplissage libre;
    P.4/B (43g minimum): Pas de supports / Résolution 0.12mm recommandée (possible en 0.2mm) / Densité de remplissage libre;
    P.4/C (13g minimum): Pas de supports / Résolution 0.12mm recommandée (possible en 0.2mm) / Densité de remplissage libre;
    P.4/D (13g minimum): Pas de supports / Résolution 0.12mm recommandée (possible en 0.2mm) / Minimum 10% de densité de remplissage;
    P.4/E (1g minimum): Pas de supports / Résolution 0.12mm recommandée / Minimum 10% de densité de remplissage;
    P.5 (13g minimum): Supports (simple à enlever) / Résolution 0.12mm recommandée (possible en 0.2mm) / Minimum 30% de densité de remplissage;
    S.1 (34g minimum): Pas de supports / Résolution 0.12mm recommandée (possible en 0.2mm) / Minimum 10% de densité de remplissage;
    S.2 (31g minimum): Supports (simple à enlever) / Résolution 0.12mm recommandée (possible en 0.2mm) / Minimum 10% de densité de remplissage;
    S.3 (32g minimum): Pas de supports / Résolution 0.12mm recommandée (possible en 0.2mm) / Minimum 10% de densité de remplissage;
    S.4 (13g minimum): Pas de supports / Résolution 0.12mm recommandée (possible en 0.2mm) / Minimum 10% de densité de remplissage;
    S.5 (37g minimum): Pas de supports / Résolution 0.12mm recommandée (possible en 0.2mm) / Minimum 10% de densité de remplissage;

À vous de jouer!

PRINTING TIPS:

  • Test prints and prototypes were made using PLA+;

  • Clean parts thoroughly before nesting;

  • Parameters for each part (only 3 with supports, easy to remove). You are free to vary fill density and resolution for more or less finished parts:

    P.1 (115g minimum): No supports / 0.12mm resolution recommended (0.2mm possible) / Free fill density;
    P.2/A (93g minimum): Supports (easy to remove) / Resolution 0.12mm recommended (possible in 0.2mm) / Free fill density;
    P.2/B (55g minimum): No supports / Resolution 0.12mm recommended (possible in 0.2mm) / Free fill density;
    P.3/A (78g minimum): No supports / Resolution 0.12mm recommended (possible in 0.2mm) / Minimum 10% fill density;
    P.3/B (35g minimum): No supports / Resolution 0.12mm recommended (possible in 0.2mm) / Free fill density;
    P.3/C (5g minimum): No supports / Resolution 0.12mm recommended (possible in 0.2mm) / Minimum 10% fill density;
    P.3/D (5g minimum): No supports / Resolution 0.12mm recommended (possible in 0.2mm) / Minimum 10% fill density;
    P.3/E (2g minimum): No supports / Resolution 0.12mm / Minimum 10% fill density;
    P.4/A (83g minimum): No supports / 0.12mm resolution recommended (0.2mm possible) / Free fill density;
    P.4/B (43g minimum): No supports / Resolution 0.12mm recommended (possible in 0.2mm) / Free fill density;
    P.4/C (13g minimum): No media / 0.12mm resolution recommended (0.2mm possible) / Free fill density;
    P.4/D (13g minimum): No supports / Resolution 0.12mm recommended (possible in 0.2mm) / Minimum 10% fill density;
    P.4/E (1g minimum): No supports / 0.12mm resolution recommended / Minimum 10% fill density;
    P.5 (13g minimum): Supports (easy to remove) / Resolution 0.12mm recommended (possible in 0.2mm) / Minimum 30% fill density;
    S.1 (34g minimum): No supports / Resolution 0.12mm recommended (possible in 0.2mm) / Minimum 10% fill density;
    S.2 (31g minimum): Supports (easy to remove) / Resolution 0.12mm recommended (possible in 0.2mm) / Minimum 10% fill density;
    S.3 (32g minimum): No supports / Resolution 0.12mm recommended (possible in 0.2mm) / Minimum 10% fill density;
    S.4 (13g minimum): No supports / Resolution 0.12mm recommended (possible in 0.2mm) / Minimum 10% fill density;
    S.5 (37 minimum): No supports / Resolution 0.12mm recommended (possible in 0.2mm) / Minimum 10% fill density;

Now it's your turn!

Tags

Advertising

Page translated by automatic translation. See the original version.
Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.