RETRO DINER BIRDFEEDER

NOTE: COPYRIGHT PA1© - PERSONNAL USE ONLY. COMMERCIAL LICENSE ON MY PATREON. FULL ACCESS AS SOON AS YOU JOIN, MULTI PARTS DESIGNS SO NO NEED FOR A MULTICOLOR PRINTER AND MOST OF THE PROJECTS ARE SUPPORT FREE!!! LINK TO PATREON:

https://www.patreon.com/PA1_MAKER

Here's a cute retro diner especially made for our feathered friends!

The whole project is really easy to print, but it's a bit different than my other projects in one major thing: The corner screws on this project are for added security only. All the parts are also glued (except for the mounting point and the seed tray), and the screws are there just in case the glue fail overtime.

So don't be surprised, some screws are captive once the whole assembly is done and it is intended this way.

For the rest, it's the same thing as usual;

-No supports needed

-All parts are placed in the right orientation for printing

-No need for a multicolor printer; All the multicolor parts are done with a simple change at height, which any printer can do.

-All the parts fit on a mini bed, like the Prusa mini or Bambulab A1 Mini.

-Complete instructions included, with exploded views and tips.

-Complete Bambulab project file included (3mf) with settings and colors already set.

As usual, i recommend to do some dry fit checks (without glue) at every step to understand correctly how the parts are joined together.

HARDWARE NEEDED:

-(8x) m3x10mm screws
-(1x) m3x18mm screw

So that's it my friends!!! Have fun and keep printing!!! :)

Pascal