Here are my Magnetic Face Picture Frames! (Finally!)

Like my Magnetic Face Lithophane boxes (https://makerworld.com/en/models/167267#profileId-183639), these picture frame have interchangeable magnetic faces!

Find them here: https://makerworld.com/en/models/255243#profileId-271644

They are designed to use the same detachable faces as my Magnetic Face Lithophane Frames. They will even work as unlit lithophane frames if you have somewhere to put them with a good backlight. Everything should be good to print in the included print profile, but do take note of the pauses for each plate. These are there to allow you to embed 8mm x 2mm magnets. The pockets are a little deeper and you may be able to fit 8mm x 2.5mm magnets. They are designed to use these acrylic sheets: https://a.co/d/hIhwluC

Printing:

The frames should print well with the settings I provide, no supports needed! Just print your desired frame and the magnetic face plate. If you intend to use it as a picture frame, you need to print one of the “Picture Adapters”. If you want use it as an unlit lithophane frame, you only need one of the frames and the face plate.

Assembly:

For pictures, insert the picture adapter, then your photo, then the acrylic sheet. Finally, attach the face plate and you're done! For lithophanes, just drop in the lithophane and attach the face plate.

Notes:

I have also included a plate with 4" x 6" border that will allow you to add a 4mm frame to your color lithophanes. When you create you lithophane on https://lithophanemaker.com/index.html, make sure you set the size of the lithophane to 150mm x 100mm. This will allow you a little wiggle room when you add the generated files to the frame border. Also, make sure you assemble the parts before slicing.

Final Notes:

I have included a plain frame face that you can customize for yourself, or you can find a couple of others I designed here: https://makerworld.com/en/models/255243#profileId-271644

If you do design your own frame face, make sure you check your preview to make sure you don't intersect with the magnet pockets!

If you would like to make these and sell them, feel free to do so! All I ask is that you don't remove my logos and give credit for the design.

Thanks for stopping by and I hope you like the frames!

Kory

KM Designs

Linn, MO

KMDesignsLinn@gmail.com