I Love making Hueforge Pictures and I am going to upload more and more of them so follow me if you like my work and i would be happy if you give me a like :)

You dont need an AMS . you can change manually the Filament if you want.

you can also use other Filament if you like

Use my Settings for best Results.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ Sunlu Silver Transmission Distance: 2
PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #9 (0.88mm) swap to Grey
At layer #13 (1.2mm) swap to Silver
At layer #22 (1.92mm) swap to White for the rest.